• <tr id="cggcs"></tr>
  • <button id="cggcs"><input id="cggcs"></input></button>
  • <nav id="cggcs"><input id="cggcs"></input></nav>
  • share_sanei@163.com ++86-21-69211226

    Company Products

    The company mainly produces high-precision compressor swing bush and vanes, and mainly sells air conditioner compressor swing bush, vanes, cutting tools, PS vanes and so on.

    Air Conditioner Parts

    Swing Bush

    The products are made of high-speed steel SKH9(SKH51) imported from Japan.


    Vane

    The materials are diversified, mainly including stainless steel, high-speed steel and powder metallurgy materials.

    Automobile Parts

    Rotor Oil Pump Drive

    Rotor Oil Pump Driven

    Rotor Oil Pump Drive

    Rotor Oil Pump Driven

    PS Vane

    Automobile Parts

    Automobile Parts

    Automobile Parts

    Cutting Tools

    Cutting Tools

    Cutting Tools

    Cutting Tools

    Cutting Tools

    Cutting Tools

    Cutting Tools

    X-POWER Features

    • Both truing and dressing are accomplished at the same time.
    • Rapid completion.
    • No special equipment or processing is required.
    • High accuracy wheel (run-out,shape,etc) is obtained.
    • High truing efficiency is assured.
    X-POWER Standard Specification
    Model Number Dimensions(mm) Applications Forms
    SX-A1 24×15×100 Surface Grinding
    SX-A2 24×20×155
    SX-A3 24×23×220
    SX-B1 Φ30×20×80 Cylindrical Grinding
    SX-B2 Φ30×30×130
       
    SX-C1 Φ30×Φ12×20 Internal Grinding
    SX-C2 Φ48×Φ24×20
    SX-C3 Φ70×Φ40×20
    SX-D1 Φ20×Φ11×55 Tool Grinding Universal Grinding
       
       
    SX-E1 45×15×90 Side-face Grinding
       
       
    SX-F1 Φ11×20×50 Tool Grinding Universal Grinding
       
       
    SX-Z Special forms.
      Special specifications are also acceptable. Please consult us!

    Surface Grinding

    Cylindrical Grinding

    Wheel:CBN170N100

    Grinding

    Conditions

    Dresser S50C X-POWER(SX-A1)
    Wheel Speed 10.5 m/s(1000 rpm)
    Table Speed 15 m/min
    Traverse Speed 215 mm/min
    Total Depth of Cut 0.200 mm
    Wheel Dimentions Φ198.902×15 Φ199.000×15
    Depth of Cut/Pass 4 μm 5 μm
    Results Wheel Wear 0.005 mm 0.049 mm
    Dresser Wear 0.190 mm 0.147 mm
    Truing Time 10.5min 7.5min
    Truing Ratio 0.098 1.250
    Motor Current 5 A 5 A
    Workpiece : SKH51 (HRC63) Surface Roughness Ra 0.723 Ra 0.648
    Straightness 1.0 μm 0.6 μm

    Contact

    国产黄片